Board Overload Alarm

acBoardOverloadAlarm

Alarm

acBoardOverloadAlarm

OID

1.3.6.1.4.1.5003.9.10.1.21.2.0.11

Description

The alarm is sent when there is an overload in one or some of the system's components. An overload occurs when a specific percentage of CPU resources is available. You can configure the percentage of available resources to trigger the raising of this alarm, by using the CLI command configure voip > sip-definition settings > overload-sensitivity-level.

Default Severity

Major

Event Type

processingErrorAlarm

Probable Cause

softwareError (46)

Severity

Condition

Text

Corrective Action

Major

An overload condition exists in one or more of the system components

"System CPU overload condition - IdleUtilization percentage=%d"

Where %d is the percentage of available CPU resources remaining.

a. Make sure that the syslog level is 0 (or not high).
b. Make sure that DebugRecording is not running.
c. If the system is configured correctly, reduce traffic.

Cleared

The overload condition passed

"System CPU overload condition - IdleUtilization percentage=%"

-